HP PROCURVE 2300 Manual de usuario descargar pdf (Pagina 128)

117

Enhancements in Release F.04.08

Configuring RADIUS Authentication and Accounting

Outline of the Steps for Configuring RADIUS Accounting

1. Configure the switch for accessing a RADIUS server.

You can configure a list of up to three RADIUS servers (one primary, two backup). The switch

operates on the assumption that a server can operate in both accounting and authentication

mode. (Refer to the documentation for your RADIUS server application.)

• Use the same radius-server host command that you would use to configure RADIUS

authentication. Refer to “2. Configure the Switch To Access a RADIUS Server” on page

109.

• Provide the following:

– A RADIUS server IP address.

– Optional—a UDP destination port for authentication requests. Otherwise the switch

assigns the default UDP port (1812; recommended).

– Optional—if you are also configuring the switch for RADIUS authentication, and

need a unique encryption key for use during authentication sessions with the

RADIUS server you are designating, configure a server-specific key. This key over-

rides the global encryption key you can also configure on the switch, and must match

the encryption key used on the specified RADIUS server. For more information, refer

to the "[key < key-string >]" parameter on page 109. (Default: null)

2. Configure the types of accounting you want the switch to perform, and the controls for sending

accounting reports from the switch to the RADIUS server(s).

• Accounting types: exec (page 115), network (page 115), or system (page 116)

• Trigger for sending accounting reports to a RADIUS server: At session start and

stop or only at session stop

3. (Optional) Configure session blocking and interim updating options

• Updating: Periodically update the accounting data for sessions-in-progress

• Suppress accounting: Block the accounting session for any unknown user with no

username accesses the switch

1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 269 270

Sin comentarios

HP PROCURVE 2300 Manual de usuario Pagina 128