HP PROCURVE 2300 Manual de usuario descargar pdf (Pagina 157)

146

Enhancements in Release F.04.08

Configuring Rapid Reconfiguration Spanning Tree (RSTP)

Menu: Configuring RSTP

1. From the console CLI prompt, enter the menu command.

ProCurve Switch # menu

2. From the switch console Main Menu, select

2. Switch Configuration ...

4. Spanning Tree Operation

3. Press

[E] (for Edit) to highlight the Protocol Version parameter field.

4. Press the Space bar to select the version of Spanning Tree you wish to run: RSTP or STP.

Note: If you change the protocol version, you will have to reboot the switch for the change to

take effect. See step 9 and step 10.

5. Press the

[Tab] or down arrow key to go to the STP Enabled field. Note that when you do this, the

remaining fields on the screen will then be appropriate for the version of Spanning Tree that

was selected in step 3. The screen image below is for RSTP.

6. Press the Space bar to select Yes to enable Spanning Tree.

Figure 66. Example of the RSTP Configuration Screen

1 2 ... 152 153 154 155 156 157 158 159 160 161 162 ... 269 270

Sin comentarios

HP PROCURVE 2300 Manual de usuario Pagina 157