HP PROCURVE 2300 Manual de usuario descargar pdf (Pagina 164)

153

Enhancements in Release F.02.11

Fast-Uplink Spanning Tree Protocol (STP)

3. If the Protocol Version is set to RSTP (as shown in figure 70), do the following:

a. Press

[E] (Edit) to move the cursor to the Protocol Version field.

b. Press the Space bar once to change the Protocol Version field to STP.

c. Press

[Enter] to return to the command line.

d. Press

[S] (for Save) to save the change and exit from the Spanning Tree Operation screen.

you will then see a screen with the following:

Figure 71. Changing from RSTP to STP Requires a System Reboot

e. Press

[0] (zero) to return to the Main Menu, then [6] to reboot the switch.

f. After you reboot the switch, enter the menu command at the CLI to return to the Main Menu,

then select:

2. Switch Configuration . . .

4. Spanning Tree Operation

You will then see the Spanning-Tree screen with STP (802.1D) selected in the Protocol Version

field (figure 72).

The asterisk indicates that

you must reboot the

switch to implement the

configuration change

from RSTP to STP.

1 2 ... 159 160 161 162 163 164 165 166 167 168 169 ... 269 270

Sin comentarios

HP PROCURVE 2300 Manual de usuario Pagina 164