HP PROCURVE 2300 Manual de usuario descargar pdf (Pagina 54)

Enhancements in Release F.05.05 through F.05.70

Enhancements in Release F.05.05 through F.05.60

4. Enter the RADIUS Host IP Address(es)

If you selected either eap-radius or chap-radius for the authentication method, configure the switch

to use 1 to 3 RADIUS servers for authentication. The following syntax shows the basic commands.

For coverage of all commands related to RADIUS server configuration, refer to “Configuring RADIUS

Authentication and Accounting” on page -102.

5. Enable 802.1X Authentication on the Switch

After configuring 802.1X authentication as described in the preceding four sections, activate it with

this command:

Syntax: radius host < ip-address >

Adds a server to the RADIUS configuration.

[key < server-specific key-string >]

Optional. Specifies an encryption key for use during

authentication (or accounting) sessions with the spec-

ified server. This key must match the key used on the

RADIUS server. Use this option only if the specified

server requires a different key than configured for the

global encryption key.

radius-server key < global key-string >

Specifies the global encryption key the switch uses for

sessions with servers for which the switch does not have

a server-specific key. This key is optional if all RADIUS

server addresses configured in the switch include a

server- specific encryption key.

Syntax: aaa port-access authenticator active

Activates 802.1X port-access on ports you have configured

as authenticators.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 269 270

Sin comentarios

HP PROCURVE 2300 Manual de usuario Pagina 54