Hp NetRAID-4M Controller Manual de usuario Pagina 126

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 336
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 125
6-20
Command Line Interface User’s Guide
0 0 Volume 15MB None 2:01:0 64KB: 15MB
0 1 Stripe 45MB 32KB None 2:02:0 64KB: 15MB
2:03:0 64KB: 15MB
2:04:0 64KB: 15MB
You set the stripe size of a container when performing the following
operations:
Creating a multi-level stripe set (container create
mstripe command)
Creating a RAID-5 set (container create raid5
command)
Creating a stripe set (container create stripe
command)
Reconfiguring a container (container reconfigure
command)
For information on the container create mstripe command,
the container create raid5 command, and the container
create stripe command, see Chapter 7, Working With Single-level
Containers and Chapter 8, Working with Multi-level Containers. For
information on the container reconfigure command, see
Chapter 9, Modifying Containers.
Understanding Container Access Attributes
The container access attributes indicate a container’s
availability. Table 6-6 lists the container access attributes, the CLI
operations associated with these attributes, the CLI commands you
use to perform these operations, and the section that describes the
operation.
Vista de pagina 125
1 2 ... 121 122 123 124 125 126 127 128 129 130 131 ... 335 336

Comentarios a estos manuales

Sin comentarios