Hp NetRAID-4M Controller Manual de usuario Pagina 232

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 336
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 231
9-24
Command Line Interface User’s Guide
following table summarizes the values for the /unprotected and
/write_cache_enable switches:
Understanding How to Enable a Container’s NVRAM Write-back Cache
This section provides an example that describes how to enable a
container’s NVRAM write-back cache.
Before enabling a container’s NVRAM write-back cache, use the
container list command to display information about your
containers, as in the following example. In the example, the Type
column indicates a Volume set on container 0, and the Usage
/write_cache_enable
Switch Setting
/unprotected
Switch Setting Result
FALSE FALSE The NVRAM write-back
cache setting for the
specified container is
disabled.
FALSE TRUE Not allowed. An
appropriate error
message displays.
TRUE FALSE The NVRAM write-back
cache setting for the
specified container is
enabled when protected.
This means the controller
enables the container’s
NVRAM write-back
cache only if a battery is
present and its status is
OK.
TRUE TRUE The NVRAM write-back
cache setting for the
specified container is
enabled always. This
means the controller
forces the enabling of the
container’s NVRAM
write-back cache even if
write data could be lost
due to no battery or a bad
battery.
Vista de pagina 231
1 2 ... 227 228 229 230 231 232 233 234 235 236 237 ... 335 336

Comentarios a estos manuales

Sin comentarios