Hp NetRAID-4M Controller Manual de usuario descargar pdf (Pagina 88)

5-10

Command Line Interface User’s Guide

------ -------- ---------- ---------- ------ -------- -------

1 NO NO Saturn YES YES 5/26/2000-14:30:56

Displaying Members of a Diskset

The members attribute indicates the SCSI device ID for all disk

drives that reside in a diskset. You specify the disk drives that

initially reside in a diskset when you create a diskset using the

disk_set create command. See Creating a Diskset on page 5-11

for information on creating a diskset. You add disks to a diskset

using the disk_set add command. See Adding a Disk to a Diskset

on page 5-12 for information on adding disks to a diskset. You

remove disks from a diskset using the disk_set remove

command. See Removing a Disk from a Diskset on page 5-13 for

information on removing disks from a diskset. You can also delete

all disks from a diskset using the disk_set delete command. See

Deleting a Diskset on page 5-15 for information on deleting a diskset.

To display the SCSI device ID for all disk drives that reside in a

diskset, use the disk_set list command with the /members

switch, as in the following example. In the example, the C:ID:L

column indicates that 2:00:0 is the only disk drive that resides on the

diskset.

HPN0> disk_set list /members

Executing: disk_set list

Diskset ID Creator ID Owner

------------------- ------------------ ------------------

0x01be868c1d74a640 0xfafaf001007a1c00 \\.\HPN0

Disks Attached OS Managed Label Shared Spare

------ -------- ---------- ---------- ------ -----

1 NO NO Saturn YES YES

Members of the Disk Set:

C:ID:L

-------

2:00:0

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 335 336

Sin comentarios

Hp NetRAID-4M Controller Manual de usuario Pagina 88