Hp ProLiant DL120 G5 Server Manual de usuario Pagina 30

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 99
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 29
Hardware options installation 30
4.
Remove the management port option cover.
5.
Using a T-15 Torx screwdriver, install the dedicated LO100c management port module.
6.
Install the primary access panel.
7.
Install the server into the rack.
8.
Connect the dedicated LO100c management port to a LAN from which the server is managed.
9.
Connect the AC power cord to the AC power source.
10.
Wait 3 minutes for LO100c firmware initialization to complete.
The dedicated LO100c management port supports DHCP-assigned and static IP addresses. To configure
network access, see the HP ProLiant Lights-Out 100 Remote Management User Guide on the HP website
(http://www.hp.com/servers/lights-out
).
Vista de pagina 29
1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 98 99

Comentarios a estos manuales

Sin comentarios