Hp ProLiant DL580 G3 Server Manual de usuario descargar pdf (Pagina 96)

96 HP ProLiant DL580 Generation 3 Server User Guide

For an overview of single- and dual-rank DIMMs, refer to "Single- and Dual-

Rank DIMMs."

For DIMM slot locations and bank assignments, refer to "DIMM Slot Locations

(on page 25

)."

General memory configuration requirements

The following configuration requirements apply regardless of the AMP mode.

• DIMMs must be installed in pairs.

• Dimms pairs in a memory bank must contain DIMMS with the same part

number.

• Always populate the DIMMs in sequential order per bank: Bank A and then

Bank B.

• Always populate the memory boards in sequential order: Board 1, Board 2,

Board 3, and Board 4. Any deviation from this requirement results in the

server defaulting to Advanced ECC ("Advanced ECC memory" on page 97

)

on the next reboot.

• Dual-rank DIMMs must be populated before single-rank DIMMs (dual-rank

DIMMs must be in the lower bank).

• The following table lists all valid combinations of single- and dual-rank

DIMM configurations for a memory board. "Single" indicates a bank of

single-rank DIMMs. "Dual" indicates a bank of dual-rank DIMMs.

NOTE: A bank contains 2 DIMMs.

Configuration Bank A Bank B

1 Single

2 Single Single

3 Dual

4 Dual Single

5 Dual Dual

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 189 190

Sin comentarios

Hp ProLiant DL580 G3 Server Manual de usuario Pagina 96