HP Hybrid POS Printer with MICR II Manual de usuario descargar pdf (Pagina 10)

2 Setting up the printer

Choosing a location for the printer

The printer requires minimum counter space and may be set on or near the POS computer.

Do not place the printer in any dusty environment or anywhere that spillage of drinks or other liquids can

occur. Place the printer on a level surface, and make sure there is enough room to open the receipt cover to

change the paper and to open the front cover to change the printer’s ribbon cassette.

Be sure to leave adequate space at the rear of the printer for connecting and accessing the cables. For models

with the built in MICR check reader, you may need to make additional adjustments to the printer’s location.

IMPORTANT: Devices such as computer monitors or large metal surfaces can aect the printer’s magnetic

eld and cause intermittent check reading errors. Be sure to place the printer away from sources of

interference.

Checking the packing list

Before installation, check that the following items have been shipped:

●

Printer

●

Test printout protecting the print head (inside receipt bucket)

●

Cardboard support for cantilever (on slip table)

●

USB power cable

●

Ribbon cassette

Report any missing items or shipping related problems to your regional HP authorized service provider for

Point of Sale System products, or go to http://www.hp.com/support.

4 Chapter 2 Setting up the printer

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 44 45

Sin comentarios

HP Hybrid POS Printer with MICR II Manual de usuario Pagina 10