HP Hybrid POS Printer with MICR II Manual de usuario descargar pdf (Pagina 33)

4 Paper requirements

Thermal paper

The printer requires qualied paper with the following dimensions:

●

Width: 80 ± 5 mm (3.15 ± 0.2 in)

●

Diameter: 83 mm (3.27 in) max

●

Length: 98 meters (321 feet)

●

Thickness: 2.4 mil

The paper must not be attached at the core. Use paper with a colored stripe at the end to indicate that the

paper is running low.

The above lengths are based on a core diameter of 22 ± 0.5 mm (0.87 in) outside, 11.5 ± 0.5 mm (0.45 in)

inside.

Manufacturers

Contact the converter of your choice to order paper. HP recommends the following paper grades produced by

their respective manufacturers. There are a number of paper converters qualied to provide this paper,

provided the POS rolls are from these recommended grades.

NOTE: When changing paper type, you need to set the printer to that paper type by sending the Set paper

type command (1D 81 m n) or by changing the paper type setting in the conguration menu.

To order paper rolls, contact your converter of choice.

Monochrome (black ink) paper

Qualied manufacturer Paper grade

Appvion, Inc. (USA)

825 E. Wisconsin Avenue

Appleton, WI 54912

Voice: (800) 922–1729

Fax: (800) 922–1712

http://www.appvion.com

Alpha 400-2.3 (was T1030)

Alpha 800-2.4 (was T1012A)

POS-Plus 600-2.4

Alpha 900-3.4 (was Superior)

All current Appvion papers are BPA-free

Jujo Thermal LTD.

P.O. Box 92 FI–27501

Kauttua, Finland

Voice: 358 (0) 10 303 200

Fax: 358 (0) 10 303 2419

http://www.jujothermal.com/

AF50KS–E3

AP62KS–E3

Kanzaki Specialty Papers (USA) P30023 (was P–300)

Thermal paper 27

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 44 45

Comentarios a estos manuales

Sin comentarios

HP Hybrid POS Printer with MICR II Manual de usuario Pagina 33

Comentarios a estos manuales

Relacionado con productos y manuales para Impresión y escaneo HP Hybrid POS Printer with MICR II