HP Hybrid POS Printer with MICR II Manual de usuario descargar pdf (Pagina 27)

Drop-in printing method

1. Insert the form or check into the slot from the top or side with the print side toward you. You may feel a

slight resistance when the form contacts the form stop.

2. Move the form or check to the right (1) until it is aligned against the right edge of the slot.

3. Slide the form or check downward (2) until the green slip-in light on the top cover turns on. This

indicates that both sensors are covered.

4. Follow the instructions from the POS computer. The printer begins printing.

5. Remove the form or check after it has been fed back out.

6. Follow the instructions from the POS computer to nish the transaction.

Inserting multipart forms

Be sure to insert multipart forms glued-edge-rst as shown in the following illustrations, whether inserting

the form from the front, top, or side.

IMPORTANT: Failure to insert multipart forms properly can result in costly paper jams and damage to the

form.

Front-insertion printing - glued edge leading:

Printing on forms or checks 21

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 44 45

Sin comentarios

HP Hybrid POS Printer with MICR II Manual de usuario Pagina 27