HP Hybrid POS Printer with MICR II Manual de usuario descargar pdf (Pagina 24)

Sets the printer to delete number (N) of leading spaces in the slip format for compressed print.

●

Compressed mode: Disabled/Enabled

Turns on compressed print for all slip printing.

●

Delete trailing spaces: Disabled/Enabled

Removes all trailing spaces for slip printing.

●

Max Lines Rotated: N lines

Varies the spacing between the rotated print formats to allow printing of more lines. The setting (N) is

changeable from 21 to 25 lines.

●

A760 Slip Stop: Disabled/Enabled

Causes the slip form to be printed at the same spot as in the A758 or A760 printer.

Select the hardware options to set

●

Print head setting

This is the print head energy rating. It must match the rating marked on the front right of the thermal

mechanism in the printer.

IMPORTANT: Do not change the print head setting unless the print head is replaced.

When a new thermal mechanism is installed, be sure this setting matches the indicated energy rating on

the mechanism.

●

Color density

The color density setting adjusts the energy level at the print head to change color printing or to adjust

to paper variations. The factory setting is 100%.

IMPORTANT: Choose an energy level no higher than necessary to achieve a dark printout. Failure to

observe this caution may result in a printer service call or voiding the printer warranty. Running a high

energy level reduces the life of the print head. Consult your HP authorized service provider for HP Point

of Sale System products if you have questions.

●

Print density (monochrome papers only)

Adjusts the print head energy level to darken the printout or adjust for paper variations. When the

printer prints high-density color print lines (text or graphics), it automatically slows down. The factory

setting is 100%.

IMPORTANT: Choose a print density setting no higher than necessary to achieve acceptable print

density. Failure to observe this rule may result in a printer service call and may void the printer

warranty. Running at a higher energy level reduces the print head life. Consult your HP authorized

service provider for HP Point of Sale System products if you have questions.

●

Alternate reset feature

This feature allows you to reset the printer by opening and closing the front cover instead of using the

reset button.

●

Paper low sensor

Allows the user to enable or disable the paper low sensor.

●

MICR

18 Chapter 2 Setting up the printer

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 44 45

Comentarios a estos manuales

Sin comentarios

HP Hybrid POS Printer with MICR II Manual de usuario Pagina 24

Comentarios a estos manuales

Relacionado con productos y manuales para Impresión y escaneo HP Hybrid POS Printer with MICR II