HP Hybrid POS Printer with MICR II Manual de usuario descargar pdf (Pagina 11)

Removing the packing materials

The packing materials protect the printer and help prevent damage during shipment.

1. Remove the cardboard supports only after placing the printer in its user position.

2. Save the cardboard supports and all other restraints and packaging materials for future use.

Having these packing materials on hand simplies preparation of the printer for shipping or for long-term

storage.

Installing new receipt paper

If the online paper status error light blinks, change the paper as soon as convenient to avoid running out of

paper part way through a transaction.

If the status/error light blinks rapidly, the paper has run out. Change the paper immediately or data may be

lost. The printer can accept and store only a limited amount of data without paper. Memory overload can

occur in the buer, leading to a total loss of data.

If you are changing the type of paper (monochrome vs. two-color ColorPOS®) send the "Set paper type" (1D

81 m n) command (description found in the Programming Guide). Refer to the "Set paper type" selection in the

conguration menu. See the section on Conguring the printer on page 13 for instructions on how to enter

the conguration menu.

1. Open the receipt cover and remove the used roll and core (if present).

2. Tear o the end of the new roll so that the edge is loose.

Installing new receipt paper 5

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 44 45

Sin comentarios

HP Hybrid POS Printer with MICR II Manual de usuario Pagina 11