HP PROCURVE 2520 Manual de usuario descargar pdf (Pagina 131)

100

101

Switch Memory and Configuration

Multiple Configuration Files

1. Reboot the switch through the Primary boot path using the startup-config

file named backupConfig.

2. Use the CLI to make configuration changes in the running-config file, and

then execute write mem.

The result is that the startup-config file used to reboot the switch is modified

by the actions in step 2.

Boot Command

Primary Boot Path

Active Startup-Config File:

backupConfig

Idle Startup-Config File:

workingConfig

Generated Running-Config File

Use CLI To Change Running-Config

Execute write mem To Save Changes to

Source Startup-Config File

Figure 6-15. Example of Reboot Process and Making Changes to the Startup-

Config File

Creating an Alternate Startup-Config File. There are two methods for

creating a new configuration file:

■ Copy an existing startup-config file to a new filename, then reboot the

switch, make the desired changes to the running-config file, then execute

write memory. (Refer to figure 6-6-15, above.)

■ Erase the active startup-config file. This generates a new, default startup-

config file that always results when the switch automatically reboots after

deletion of the currently active startup-config file. (Refer to “Erasing a

Startup-Config File” on page 6-32.)

6-25

1 2 ... 126 127 128 129 130 131 132 133 134 135 136 ... 543 544

Comentarios a estos manuales

Sin comentarios

HP PROCURVE 2520 Manual de usuario Pagina 131

Comentarios a estos manuales

Relacionado con productos y manuales para Software HP PROCURVE 2520