HP PROCURVE 2520 Manual de usuario descargar pdf (Pagina 397)

100

101

File Transfers

Transferring Switch Configurations

Xmodem: Copying a Software Image from the Switch to a

Serially Connected PC or UNIX Workstation

To use this method, the switch must be connected via the serial port to a PC

or UNIX workstation.

Syntax: copy flash xmodem < pc | unix >

Uses Xmodem to copy a designated configuration file from the

switch to a PC or Unix workstation.

For example, to copy the primary flash image to a serially connected PC:

1. Execute the following command:

Procurve# copy xmodem flash

Press ‘Enter’ and start XMODEM on your host...

2. After you see the above prompt, press

[Enter].

3. Execute the terminal emulator commands to begin the file transfer.

Transferring Switch Configurations

Transfer Features

Feature Page

Use TFTP to copy from a remote host to a config file. A-24

Use TFTP to copy a config file to a remote host. A-26

Use Xmodem to copy a configuration from a serially connected host to a config file. A-26

Use Xmodem to copy a config file to a serially connected host. A-26

Using the CLI commands described in this section, you can copy switch

configurations to and from a switch.

A-23

1 2 ... 392 393 394 395 396 397 398 399 400 401 402 ... 543 544

Comentarios a estos manuales

Sin comentarios

HP PROCURVE 2520 Manual de usuario Pagina 397

Comentarios a estos manuales

Relacionado con productos y manuales para Software HP PROCURVE 2520