HP PROCURVE 2520 Manual de usuario descargar pdf (Pagina 430)

100

101

Monitoring and Analyzing Switch Operation

Interface Monitoring Features

You must use the following configuration sequence to configure port and static

trunk monitoring in the CLI:

1. Assign a monitoring (mirror) port.

2. Designate the port(s) and/or static trunk(s) to monitor.

Displaying the Monitoring Configuration.

Syntax: show monitor

This command lists the port assigned to receive monitored

traffic and the ports and/or trunks being monitored.

For example, if you assign port A6 as the monitoring port and configure the

switch to monitor ports A1 - A3, show monitor displays the following:

Port receiving monitored traffic.

Monitored Ports

Figure B-20. Example of Monitored Port Listing

Configuring the Monitor Port.

Syntax: [no] mirror-port [< port-num >]

This command assigns or removes a monitoring port, and

must be executed from the global configuration level. Removing

the monitor port disables port monitoring and resets the

monitoring parameters to their factory-default settings.

For example, to assign port 6 as the monitoring port:

ProCurve(config)# mirror-port 6

To turn off monitoring:

ProCurve(config)# no mirror-port

B-26

1 2 ... 425 426 427 428 429 430 431 432 433 434 435 ... 543 544

Comentarios a estos manuales

Sin comentarios

HP PROCURVE 2520 Manual de usuario Pagina 430

Comentarios a estos manuales

Relacionado con productos y manuales para Software HP PROCURVE 2520