HP PROCURVE 2520 Manual de usuario descargar pdf (Pagina 315)

100

101

Configuring for Network Management Applications

Using SNMP Tools To Manage the Switch

Configuring SNMPv3 Notifications

The SNMPv3 notification process allows messages that are passed via SNMP

between the switch and a network management station to be authenticated

and encrypted.

To configure SNMPv3 notifications, follow these steps:

1. Enable SNMPv3 operation on the switch by entering the snmpv3 enable

command (see “SNMP Version 3 Commands” on page 13-6).

When SNMPv3 is enabled, the switch supports:

• Reception of SNMPv3 notification messages (traps and informs)

• Configuration of initial users

• (Optional) Restriction of non-SNMPv3 messages to “read only”

2. Configure SNMPv3 users by entering the snmpv3 user command (see

“SNMPv3 Users” on page 13-7). Each SNMPv3 user configuration is

entered in the User Table.

3. Assign SNMPv3 users to security groups according to their level of access

privilege by entering the snmpv3 group command (see “Assigning Users to

Groups” on page 13-10).

4. Define the name of an SNMPv3 notification configuration by entering the

snmpv3 notify command.

Syntax: [no] snmpv3 notify <notify_name> tagvalue <tag_name>

Associates the name of an SNMPv3 notification

configuration with a tag name used (internally) in

SNMPv3 commands. To delete a notification-to-tag

mapping, enter no snmpv3 notify <notify_name>.

notify < notify_name >

Specifies the name of an SNMPv3 notification

configuration.

tagvalue < tag_name >

Specifies the name of a tag value used in other SNMPv3

commands, such as snmpv3 targetaddress params taglist

<tag_name> in Step 5.

13-23

1 2 ... 310 311 312 313 314 315 316 317 318 319 320 ... 543 544

Comentarios a estos manuales

Sin comentarios

HP PROCURVE 2520 Manual de usuario Pagina 315

Comentarios a estos manuales

Relacionado con productos y manuales para Software HP PROCURVE 2520