HP PROCURVE 2520 Manual de usuario descargar pdf (Pagina 387)

100

101

File Transfers

Downloading Switch Software

Syntax: no tftp-enable

This command disables all TFTP operation on the switch

except

for the auto-TFTP feature. To re-enable TFTP opera-

tion, use the tftp-enable command. When TFTP is disabled,

the instances of tftp in the CLI copy command and the Menu

interface “Download OS” screen become unavailable.

Note: This command does not disable auto-TFTP operation.

To disable an auto-TFTP command configured on the

switch, use the no auto-tftp command described below to

remove the command entry from the switch’s configuration.

Syntax: no auto-tftp

If auto-TFTP is configured on the switch, this command

deletes the auto-tftp entry from the switch configuration,

thus preventing auto-tftp operation if the switch reboots.

Note: This command does not affect the current TFTP-

enable configuration on the switch.

Command Options

If you need to enable SSH v2 (which is required for SFTP) enter this command:

ProCurve(config)# ip ssh version 2

Note As a matter of policy, administrators should not enable the SSHv1-only or the

SSHv1-or-v2 advertisement modes. SSHv1 is supported on only some legacy

switches (such as the ProCurve Series 2500 switches).

To confirm that SSH is enabled type in the command

ProCurve(config)# show ip ssh

Once you have confirmed that you have enabled an SSH session (with the show

ip ssh command) you can then open your third-party software client applica-

tion to begin using the SCP or SFTP commands to safely transfer files or issue

commands to the switch.

If you need to disable secure file transfer:

ProCurve(config)# no ip ssh filetransfer

A-13

1 2 ... 382 383 384 385 386 387 388 389 390 391 392 ... 543 544

Comentarios a estos manuales

Sin comentarios

HP PROCURVE 2520 Manual de usuario Pagina 387

Comentarios a estos manuales

Relacionado con productos y manuales para Software HP PROCURVE 2520