Hp Hitachi Dynamic Link Manager Software Manual de usuario Pagina 212

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 746
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 211
3. Creating an HDLM Environment
188
29. If LILO is used as the boot loader, execute the /sbin/lilo command to have
the new settings take effect.
30. Shut down the host.
Execute the following command to shut down the host:
# shutdown -h now
31. Change the configuration from a single-path configuration to a multi-path
configuration.
32. Start the host.
33. Execute the
mount command to check that the HDLM device is mounted.
The following shows an execution example for when
GRUB is used as the boot
loader:
# mount
/dev/sddlmaa2 on /
type ext2 (rw)
:
:
/dev/sddlmaa1 on /boot
type ext2 (rw)
/dev/sddlmaa4 on /tmp
type ext2 (rw)
/dev/sddlmaa5 on /var
type ext2 (rw)
/dev/sddlmaa6 on /usr
type ext2 (rw)
none on /dev/shm type tmpfs (rw)
Check the underlined section.
34. If Red Hat Enterprise Linux, SUSE LINUX Enterprise Server 10, or SUSE
LINUX Enterprise Server 11 is used, make sure that the HDLM device is
allocated to the swap partition.
Make sure that the HDLM device name is displayed in the
Filename column of
the
/proc/swaps file.
3.7.4 Upgrade Installation in an Environment Where an HDLM
Device Is Used as a Boot Disk
This subsection explains how to perform an upgrade installation of HDLM and specify
environment settings in a multi-path configuration boot disk environment using the
HDLM device.
Note that if settings are incorrect, the OS might not start. For details about what action
to take if the OS cannot be started from an HDLM device, see 3.7.7 Countermeasures
for Unsuccessful Startup of the OS from an HDLM Device.
Vista de pagina 211
1 2 ... 207 208 209 210 211 212 213 214 215 216 217 ... 745 746

Comentarios a estos manuales

Sin comentarios