Hp Hitachi Dynamic Link Manager Software Manual de usuario Pagina 338

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 746
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 337
3. Creating an HDLM Environment
314
2. Make sure that the HDLM device is defined in the /etc/fstab file.
Make sure that the mount points for the following HDLM management-target
devices are defined so that the HDLM device will be mounted:
When
ELILO is used as the boot loader:
Root directory (
/), /boot/efi, /tmp, /usr, /var, swap
When GRUB is used as the boot loader:
Root directory (
/), /boot, /tmp, /usr, /var, swap
When LILO is used as the boot loader:
Root directory (
/), /tmp, /usr, /var, swap
When LVM2 is used:
/boot
The following shows an example of the /etc/fstab file:
:
:
/dev/sddlmaa
2 / ext2 defaults 1 1
:
:
3. Execute the HDLM-configuration definition utility (dlmcfgmgr) with the -v
parameter specified to check the correspondence between the HDLM device and
the SCSI device.
If the SCSI device name has been changed by using the
udev function, specify
the
-udev parameter also.
Figure 3-41: Example of Executing the dlmcfgmgr Utility with the -v Parameter
Specified shows an example of executing the
dlmcfgmgr utility with the -v
parameter specified. Figure 3-42: Example of Executing the dlmcfgmgr Utility
with the -v and -udev Parameters Specified shows an example of executing the
dlmcfgmgr utility with the -v and -udev parameters specified.
Vista de pagina 337
1 2 ... 333 334 335 336 337 338 339 340 341 342 343 ... 745 746

Comentarios a estos manuales

Sin comentarios