Hp Hitachi Dynamic Link Manager Software Manual de usuario Pagina 431

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 746
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 430
6. Command Reference
407
device name is /dev/sde while confirming command operation.
# /opt/DynamicLinkManager/bin/dlnkmgr offline -path
-device /dev/sde
KAPL01052-I The currently selected paths will be changed
to the Offline(C) status. Is this OK? [y/n]:y
KAPL01053-I If you are sure that there would be no problem
when the path is placed in the Offline(C) status, enter
y. Otherwise, enter n. [y/n]:y
KAPL01061-I 1 path(s) were successfully placed
Offline(C); 0 path(s) were not. Operation name = offline
-s
Executes the command without displaying the message asking for confirmation
of command execution from the user. Specify this parameter if you want to skip
the response to the confirmation message: for example, when you want to execute
the command in a shell script or batch file.
Example
The following example shows how to place a path, whose AutoPATH_ID is
000001, offline without asking for confirmation of command execution
from the user:
# /opt/DynamicLinkManager/bin/dlnkmgr offline -pathid 1
-s
KAPL01061-I 1 path(s) were successfully placed
Offline(C); 0 path(s) were not. Operation name = offline
#
(2) To Display the Format of the Offline Operation
-help
Displays the format of the offline operation.
Example
The following example shows how to display the format of the
offline
operation:
# /opt/DynamicLinkManager/bin/dlnkmgr offline -help
offline:
Format
dlnkmgr offline [-path] -hba HBAPortNumber.BusNumber
[-s]
dlnkmgr offline [-path] -cha -pathid AutoPATH_ID [-s]
dlnkmgr offline [-path] -pathid AutoPATH_ID [-s]
dlnkmgr offline [-path] -device SCSI_Device_Name [-s]
Valid value
Vista de pagina 430
1 2 ... 426 427 428 429 430 431 432 433 434 435 436 ... 745 746

Comentarios a estos manuales

Sin comentarios