Hp Hitachi Dynamic Link Manager Software Manual de usuario Pagina 290

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 746
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 289
3. Creating an HDLM Environment
266
3.15 Settings for the RHCM
The user must execute the following procedure when HDLM is installed in an
environment that uses RHCM.
3.15.1 Notes on Using RHCM
The HDLM device used by the cluster service and the HDLM device used by Quorum
must be the same.
3.15.2 When Using Red Hat Enterprise Linux AS4/ES4
To specify settings for RHCM:
1. Stop the service of the RHCM cluster.
Stop the RHCM service with the following command if the service is running:
# service rgmanager stop
# service cman stop
# service ccsd stop
2. Change the SCSI device being used by RHCM to an HDLM device.
Edit as shown below if the lower SCSI device (
/dev/sda) of the HDLM device
(
/dev/sddlmaa) is being used as /dev/raw/raw1.
# /dev/raw/raw1 /dev/sda
/dev/raw/raw1 /dev/sddlmaa
Comment out /dev/sda and add /dev/sddlmaa.
3. Restart the
rawdevices service to apply the changes made in Step 2.
Execute the following command to restart the service:
# service rawdevices restart
4. Start the cluster service of RHCM.
Executing the following command to start the service:
# service ccsd start
# service cman start
# service rgmanager start
Vista de pagina 289
1 2 ... 285 286 287 288 289 290 291 292 293 294 295 ... 745 746

Comentarios a estos manuales

Sin comentarios