Hp Hitachi Dynamic Link Manager Software Manual de usuario Pagina 217

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 746
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 216
3. Creating an HDLM Environment
193
When GRUB is the boot loader
Change the
default number so that a boot can be performed using the
configuration copied in step 5.
default=2
When LILO or ELILO is used as the boot loader:
Specify
label for default.
default sd-HDLM_194.EL
10. If LILO is being used as the boot loader, execute the /sbin/lilo command to
have the changes take effect.
11. Shut down the host.
Execute the following command to shut down the host:
# shutdown -h now
12. Change the configuration from a multi-path configuration to a single-path
configuration.
13. Start the host.
14. Execute the
mount command to make sure that the SCSI device is mounted.
The following shows an execution example for when
GRUB is used as the boot
loader:
# mount
/dev/sda2 on /
type ext2 (rw)
:
:
/dev/sda1 on /boot
type ext2 (rw)
/dev/sda4 on /tmp
type ext2 (rw)
/dev/sda5 on /var
type ext2 (rw)
/dev/sda6 on /usr
type ext2 (rw)
none on /dev/shm type tmpfs (rw)
Check the underlined section.
15. If Red Hat Enterprise Linux, SUSE LINUX Enterprise Server 10, or SUSE
LINUX Enterprise Server 11 is used, make sure that the SCSI device is allocated
to the swap partition.
Make sure that the SCSI device name is displayed in the
Filename column of the
/proc/swaps file.
Vista de pagina 216
1 2 ... 212 213 214 215 216 217 218 219 220 221 222 ... 745 746

Comentarios a estos manuales

Sin comentarios