Hp Hitachi Dynamic Link Manager Software Manual de usuario Pagina 254

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 746
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 253
3. Creating an HDLM Environment
230
# dlmcfgmgr -v
HDevName Management Device Host Channel Target Lun
/dev/sddlmaa
configured /dev/sdh 1 0 0 0
/dev/sddlmab configured /dev/sdj 1 0 0 1
:
:
KAPL10302-I /sbin/dlmcfgmgr completed normally.
#
HDLM devices are listed in the HDevName column, and SCSI devices are listed
in the
Device column.
2. Check the
/etc/crypttab file's second field.
If a SCSI device is directly specified, change the SCSI device in the
/etc/
crypttab
file's second field to the corresponding HDLM device that was
checked in step 1, and then go to step 4.
The following shows an example of editing the
/etc/crypttab file's
second field:
Before editing:
luks-volume1 /dev/sdh /etc/cryptpassword1
After editing:
luks-volume1 /dev/sddlmaa /etc/cryptpassword1
If the device name is specified in UUID format, go to step 3.
3. Execute the following command to check the correspondence between the UUID
and the device name.
# blkid -t UUID="050f9901-3ab8-4556-a091-9c6e4a404f09" -l -o
device
/dev/sdh
#
If you have an HDLM device name as the output, change the UUID to the
HDLM device name in the
/etc/crypttab file's second field.
If you have got a SCSI device name as the output, check the output of step 1
to confirm the HDLM device name corresponding to the SCSI device name,
and change the UUID to the HDLM device name in the
/etc/crypttab
file's second field.
The following shows an example of changing the setting in the
/etc/crypttab
file's second field.
Vista de pagina 253
1 2 ... 249 250 251 252 253 254 255 256 257 258 259 ... 745 746

Comentarios a estos manuales

Sin comentarios