HP RP7 Retail System Model 7100 Manual de usuario descargar pdf (Pagina 60)

Enter/Exit Programming Mode Reading Parameters

HP Retail Integrated Barcode Scanner

Illumination On Time

Defines the amount of time illumination is kept ON after a label is decoded. If an object is

detected before Illumination ON expires, the timer is refreshed with the Object Gone

timeout value. Range is 0 millisecond to 25.5 milliseconds in 100 millisecond intervals.

Presentation Illumination Control

Controls the illumination status while the reading mode is Automatic Trigger Object Sense

Operating Mode and the scanner is attempting to detect objects.

This configuration is available in Automatic (Object Sense) only.

Select Illumination On Time Setting

To configure this feature, scan the ENTER/EXIT

PROGRAMMING MODE barcode above, then the

barcode at left followed by the digits from the

Alphanumeric characters in Appendix D, Keypad

representing your desired character(s). End by scan-

ning the ENTER/EXIT barcode again.

$CSNON

DEFAULT

1 Second

Illumination Control = OFF

Illumination Control = ON

Illumination Control = Dim

DEFAULT

$CSMIL00(CR)

$CSMIL01(CR)

$CSMIL02(CR)

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 243 244

Sin comentarios

HP RP7 Retail System Model 7100 Manual de usuario Pagina 60