HP RP7 Retail System Model 7100 Manual de usuario descargar pdf (Pagina 63)

Reading Parameters Enter/Exit Programming Mode

Programming Reference Guide

MULTIPLE LABEL READING

In standard (default) mode, when the scanner’s aiming system is activated by motion, it then

acquires and processes each image in the area in front of it (the Volume). In this case, the

scanner stops processing the image once it decodes a label. If several labels are present in

the volume, only the first label encountered is decoded and sent.

When Multiple Reading Mode is enabled, t

he scanner keeps on processing the image until

all the labels present are decoded. The scanner then sorts the data from all the barcodes (if

configured to do so) before transmitting it.

Multiple Labels Reading in a Volume

Enables/disables the ability of the scanner to decode multiple labels in the same volume,

which is the area in front of the scanner.

Multiple Labels per Frame

Specifies the ability of the scanner to decode and transmit a set of code labels in a specific

volume and in a single frame of time. When in Multiple Labels per Frame the scanner beeps

and turns on the good read LED indication for each code read in a frame.

When Multiple Labels Mode is enabled, ISBT pairing,

ABC Codabar pairing, and

composites are not allowed.

Multiple Labels Reading = Disable

Multiple Labels Reading = Enable

DEFAULT

$CDEML00(CR)

$CDEML01(CR)

Multiple Labels per Frame = Disable

Multiple Labels per Frame = Enable

DEFAULT

$CSNML00(CR)

$CSNML01(CR)

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 243 244

Sin comentarios

HP RP7 Retail System Model 7100 Manual de usuario Pagina 63