HP CommonIO Products Manual de usuario descargar pdf (Pagina 151)

PAD Services

UUCP Support (x29uucpd)

Chapter 6 151

Any – indicates that bill can be called at any time.

5 – is the retry duration (dave will try again to connect to bill in 5

minutes).

dev_bill – is the name of the remote system declared in dave’s Devices

file.

f – is the file transfer protocol. HP recommends using f rather than g for

better performance.

19200 – is the transfer rate (it must be set at the same speed as that

specified in the dave’s Devices file).

““ \r\d\r\d\r login: -BREAK -login: uucp word: test – is login

information declaring uucp as the user for uucp and uucico processes,

with the password “test”. The password creates a link to the entry in the

/etc/passwd file of bill.

Step 3. Make sure that the following entry appears in the

/usr/lib/uucp/Devices file:

dev_bill x29/bill - 19200 direct

x29/bill has a maximum of 14 characters. The x29/bill entry creates

a link with the pad_uucp entry in the x29hosts file.

Step 4. Add the following lines to the /usr/lib/uucp/Permissions file:

MACHINE=bill \

SENDFILES=yes REQUEST=yes CALLBACK=no \

READ=/

WRITE=/

COMMANDS=ALL

NOTE You can verify current permissions with the uucheck -v command.

Step 5. Create the following entry in the /etc/x25/x29hosts file:

1 2 ... 146 147 148 149 150 151 152 153 154 155 156 ... 260 261

Sin comentarios

HP CommonIO Products Manual de usuario Pagina 151