HP CommonIO Products Manual de usuario descargar pdf (Pagina 60)

Configuration

Configuring X.25 over LLC2

Chapter 360

• To enable the cmns, complete the following steps:

Step 1. Run the following command at the CISCO console:

Configure Terminal

Step 2. Run the following command at the CISCO console:

Interface fastethernet 1/0

Step 3. Run the following command at the CISCO console:

cmns enable

Step 4. Run the following command at the CISCO console:

<Ctrl+Z>

• To add routing entries to X.25 routing table, complete the following

steps:

Step 1. Run the following command at the CISCO console:

Configure Terminal

Step 2. Run the following command at the CISCO console:

x25 route ^ 7111 interface FastEthernet1/10 mac

0011.0a80.31d6

Step 3. Run the following command at the CISCO console:

x25 route ^ 7222 interface FastEthernet1/10 mac

0800.09c4.728a

Step 4. Run the following command at the CISCO console:

<Ctrl+Z>

Starting and Stopping Configuration

Starting

To initialize the x25overllc2 devices, execute the x25init command with

the -L option at the command prompt.

The syntax for execution is:

x25init -c <config_file> -L <llc2_config_file>

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 260 261

Sin comentarios

HP CommonIO Products Manual de usuario Pagina 60