HP 200 Unified Threat Management (UTM) Appliance Series Guía de inicio rápido descargar pdf (Pagina 104)

Figure 72 Rebooting the device

2. If necessary, select Check whether the configuration is saved to the configuration file for next

reboot.

If you select this option, the device checks whether the configuration file for the next startup reflects

the running configuration. If yes, the device reboots. If not, a prompt is displayed and the device

does not reboot. You can save the configuration and try to reboot the device again.

If you do not select this option, the device directly reboots.

3. Click Apply.

A confirmation dialog box appears.

4. Confirm the reboot operation.

Rebooting the firewall at the CLI

CAUTION:

• Device reboot can interrupt network services.

• To avoid data loss, use the save command to save the current configuration before a reboot.

• Use the display startup and display boot-loader commands to verify that you have correctly set the

startup configuration file and the main system software image file. If the main system software image file

has been corrupted or does not exist, the device cannot reboot. You must re-specify a main system

software image file, or power off the device and then power it on so the system can reboot with the

backup system software image file.

Rebooting devices immediately at the CLI

To reboot a device, execute the following command in user view:

Task Command

Reboot a subcard or the device immediately. reboot

Scheduling a device reboot

The switch supports only one device reboot schedule. If you configure the schedule reboot delay

command multiple times, the last configuration takes effect. The schedule reboot at command and the

schedule reboot delay command overwrite each other, and whichever is configured last takes effect.

For data security, if you are performing file operations at the reboot time, the system does not reboot.

To schedule a device reboot, execute one of the following commands in user view:

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 149 150

Sin comentarios

HP 200 Unified Threat Management (UTM) Appliance Series Guía de inicio rápido Pagina 104