HP 200 Unified Threat Management (UTM) Appliance Series Guía de inicio rápido descargar pdf (Pagina 51)

45

Ste

p

Command

Remarks

6. Specify the number of stop bits.

stopbits { 1 | 1.5 | 2 }

The default is 1.

Stop bits indicate the end of a

character. The more the bits, the

slower the transmission.

7. Specify the number of data bits

in each character.

databits { 5 | 6 | 7 | 8 }

By default, the number of data bits

in each character is 8.

The setting depends on the

character coding type. For

example, you can set it to 7 if

standard ASCII characters are to

be sent, and set it to 8 if extended

ASCII characters are to be sent.

8. Define a shortcut key for

starting a session.

activation-key character

By default, press Enter to start a

session.

9. Define a shortcut key for

terminating tasks.

escape-key { default | character }

By default, press Ctrl+C to

terminate a task.

10. Configure the type of terminal

display.

terminal type { ansi | vt100 }

By default, the terminal display

type is ANSI.

The device supports two types of

terminal display: ANSI and

VT100. HP recommends setting the

display type of both the device and

the client to VT100. If the device

and the client use different display

types (for example, HyperTerminal

or Telnet terminal) or both are set to

ANSI, when the total number of

characters of the currently edited

command line exceeds 80, an

anomaly such as cursor corruption

or abnormal display of the terminal

display might occur on the client.

11. Configure the user privilege

level for login users.

user privilege level level

By default, the default command

level is 0 for the AUX user interface.

12. Set the maximum number of

lines to be displayed on a

screen.

screen-length screen-length

By default, a screen displays 24

lines at most.

A value of 0 disables pausing

between screens of output.

13. Set the size of command

history buffer.

history-command max-size value

By default, the buffer saves 10

history commands at most.

14. Set the idle-timeout timer.

idle-timeout minutes [ seconds ]

The default idle-timeout is 10

minutes. The system automatically

terminates the user's connection if

there is no information interaction

between the device and the user in

timeout time.

Setting idle-timeout to 0 disables

the timer.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 149 150

Comentarios a estos manuales

Sin comentarios