HP 200 Unified Threat Management (UTM) Appliance Series Guía de inicio rápido descargar pdf (Pagina 39)

Ste

Command

Remarks

14. Configure common

settings for VTY user

interfaces.

See "Configuring common VTY user

interface settings (optional)."

Optional.

The next time you attempt to Telnet to the CLI, you must provide the configured login username and

password, as shown in Figure 33. If y

ou are required to pass a second authentication, you must also

provide the correct password to access the CLI. If the maximum number of login users has been reached,

your login attempt fails and the message "All user interfaces are used, please try later!" appears.

Figure 33 Scheme authentication interface for Telnet login

Configuring common VTY user interface settings (optional)

You might be unable to access the CLI through a VTY user interface after configuring the auto-execute

command command on it. Before you configure the command and save the configuration, make sure you

can access the CLI through a different user interface.

To configure common settings for VTY user interfaces:

Ste

Command

Remarks

1. Enter system view.

system-view N/A

2. Enter one or multiple VTY user

interface views.

user-interface vty first-number

[ last-number ]

N/A

3. Enable the terminal service.

shell

Optional.

By default, terminal service is

enabled.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 149 150

Sin comentarios

HP 200 Unified Threat Management (UTM) Appliance Series Guía de inicio rápido Pagina 39