HP 200 Unified Threat Management (UTM) Appliance Series Guía de inicio rápido descargar pdf (Pagina 64)

2. Verify the configuration:

# On the PC, launch a Web browser and enter the IP address of the interface in the address bar.

The Web login page appears, as shown in Figure 48.

Figure 48 Web login page

# Enter the username, password, verification code, and click Login. The homepage appears. After

HTTPS login configuration example

Network requirements

As shown in Figure 49, to prevent unauthorized users from accessing the firewall, configure the firewall

as the HTTPS server and the host as the HTTPS client, and request a certificate for each of them.

Figure 49 Network diagram

Configuration procedure

This example assumes that the CA is named new-ca, runs Windows Server, and is installed with the

SCEP add-on. This example also assumes that the firewall, host, and CA can reach one other.

1. Configure the firewall (HTTPS server):

# Configure a PKI entity, configure the common name of the entity as http-server1, and the FQDN

of the entity as ssl.security.com.

<Firewall> system-view

[Firewall] pki entity en

[Firewall-pki-entity-en] common-name http-server1

[Firewall-pki-entity-en] fqdn ssl.security.com

[Firewall-pki-entity-en] quit

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 149 150

Sin comentarios

HP 200 Unified Threat Management (UTM) Appliance Series Guía de inicio rápido Pagina 64