HP Web Jetadmin Software Manual de usuario descargar pdf (Pagina 331)

Browser

Use this option to congure specic settings for the web browser on the device (for example, enabling OXPd 1.6

support). The web browser settings that can be congured include connection timeout, response timeout, and a

list of trusted sites.

Use the following steps to congure this option:

1. To set the connection timeout, select an option from the drop-down list.

2. To set the response time, select an option from the drop-down list.

3. Enter trusted sites in the Trusted sites text box. For multiple sites, use a semicolon to separate each entry.

Calibration Timing

Use this option to control when calibrations are performed. You can set the timer (in hours) to turn on or o

calibration. If a time is set, the calibration takes place after the timer expires and the next job is nished printing.

To set this option, select a time from the dropdown box and click Apply.

Cartridge Low Action

This option lets you specify how the printer responds when a toner-low condition exists. Set the printer to

continue normal operations or set it to stop printing. In either case, HP Web Jetadmin displays a Toner Low

message on the Device Status page. Allowing the printer to continue printing when the toner is low lets the

current print job nish printing and gives the user who is responsible for the printer time to change the toner

cartridge. However, this might result in poor print quality.

Use the following steps to congure this option:

1. To let the printer continue printing when the toner is low, select Continue.

2. To stop the printer from printing until the toner is replaced, select Stop.

Cartridge Out Action

This option lets you specify how the printer responds when a toner-out condition exists. Set the printer to

continue normal operations or set it to stop printing. In either case, HP Web Jetadmin displays a Toner Out

message on the Device Status page. Allowing the printer to continue printing when the toner is out lets the

current print job nish printing and gives the user who is responsible for the printer time to change the toner

cartridge. However, this might result in poor print quality.

Use the following steps to congure this option:

1. To let the printer continue printing when the toner is out, select Continue.

2. To stop the printer from printing until the toner is replaced, select Stop.

Clearable Warnings

This option lets you determine whether a warning is cleared on the control panel or when another job is sent.

Use the following steps to congure this option:

ENWW Device Conguration Options for Device 305

1 2 ... 326 327 328 329 330 331 332 333 334 335 336 ... 491 492

Sin comentarios

HP Web Jetadmin Software Manual de usuario Pagina 331