HP Web Jetadmin Software Manual de usuario Pagina 449

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 492
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 448
Display Options on Information Tab
Use this option to enable or disable the options that appear on the Information tab in the HP Embedded Web
Server (EWS) on the device.
To congure this option, perform the following steps:
1. To enable the Print option, select the Display Print Page on Information Tab checkbox.
-or-
To disable the Print option, clear the Display Print Page on Information Tab checkbox.
2. To enable the Job Log option, select the Display Job Log on Information Tab checkbox.
-or-
To disable the Job Log option, clear the Display Job Log on Information Tab checkbox.
Embedded Web Server Password
If you are concerned about security, specify a password for the Embedded Web Server conguration.
NOTE: When setting a password on the device, you must enter the current password, if any, regardless of
credentials stored in the application. If you don’t, the setting will fail as “Invalid Data”.
To assign the password, type it in Password. Type the same password in Conrm password. To change the
password, type it in Current EWS password. Type the same password in Conrm password.
Enable Host USB plug and play
Use this option to enable or disable the USB Plug and Play feature on the device. The USB Plug and Play feature
is used to perform tasks such as scanning to a USB ash drive.
NOTE: If this option is disabled, control-panel applications that require the USB Plug and Play feature, such as
the Save To USB application, are automatically disabled.
To enable the USB Plug and Play feature, select the Enabled option.
-or-
To disable the USB Plug and Play feature, select the Disabled option.
Enable PJL Device Access Commands
HP Printer Job Language (PJL) is a command language that can be used to request information from printers (for
example, printer model, conguration settings, and status) and change the conguration settings on printers.
Use this option to enable or disable PJL commands on the printer.
To allow users to send PJL commands to the printer, select the Enabled option.
NOTE: If the Enabled option is selected for non-HP FutureSmart devices, be aware of the following issues:
Disk jobs can no longer be deleted by using the Erase Customer Data button on the Storage tab.
If the Printer Wakeup conguration option is enabled, this feature might not work.
ENWW Device Conguration Options for Security 423
Vista de pagina 448
1 2 ... 444 445 446 447 448 449 450 451 452 453 454 ... 491 492

Comentarios a estos manuales

Sin comentarios