HP Compaq Professional 5000 series Guía para resolver problemas Pagina 49

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 74
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 48
Quick Troubleshooting Guide
A-1
appendix
A
F
URTHER
T
ROUBLESHOOTING
Preliminary Checklist
This section describes some simple, preliminary tests and guidelines for troubleshooting the
computer without using the diagnostics.
If you encounter some minor problem with the computer or a software application, go through the
following checklist for possible solutions before running any of the diagnostic utilities:

Are the computer and monitor connected to a working electrical outlet?

Is the computer turned on?

Is the green power light illuminated?

Is the monitor turned on?

Is the green monitor light illuminated?

Turn up the monitor brightness and contrast controls if the monitor is dim.

Press and hold any key. If the system beeps, then the keyboard should be operating
correctly.

Check all cables for loose or incorrect connections.

Reconfigure the computer after installing a non Plug and Play expansion board or other
option, such as a diskette drive.

Are all of the necessary device drivers installed?

Have all printer drivers been installed for each application?

Remove all diskettes from the diskette drives before you turn on the system.

Are all switches set correctly?

Is the NIC Remote Wakeup cable (featured on some models) connected between the NIC
and the riser/system board?

Are all memory sockets filled on computers using RIMMs?

Ensure that memory module types are not mixed on the same system board. The system
will not boot if RIMMs and DIMMs are mixed.
Vista de pagina 48
1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 73 74

Comentarios a estos manuales

Sin comentarios