HP Compaq Professional 5000 series Guía para resolver problemas descargar pdf (Pagina 71)

B-10

POST Error Messages - Numbered

POST Error Messages

Continued

Screen Message Beeps* Probable Cause Recommended Action

Green Power LED Blinks

Once per Second

None Computer in normal

Suspend mode.

None

Green Power LED ON None Computer on. None

Invalid Electronic Serial

Number

None Electronic serial number

has become corrupted.

Run Computer Setup (F10 Setup).

If Setup already has data in the field

or will not allow the serial number to

be entered, download and run

SP5572.EXE (SNZERO.EXE).

Flashing Power and Hard

Drive Green LEDs

None Unseated riser board. 1. Remove riser board.

2. Wipe connector.

3. Reinstall riser board.

Red Power LED Blinks Every

2 or more Seconds

None Power supply overloaded. 1. Push in power button. LED

should be green.

2. Remove all AC power from

computer, wait 30 seconds,

then apply power.

3. Remove load from power

supply by removing options

one at a time until computer

runs.

4. Check for damage to system

board.

5. Replace system board.

6. Replace power supply.

Red Power LED Blinks

Every Second

None System memory error. 1. Check memory module.

2. Remove and reseat memory

module.

3. See the "Solving Memory

Problems" section of this

guide.

Red power LED ON None Processor unseated. Reseat processor in system board.

XXOOOYZZ Parity Check None Parity RAM failure. Run Computer Setup and

Diagnostic Utilities.

* L = Long, S = Short

1 2 ... 66 67 68 69 70 71 72 73 74

Comentarios a estos manuales

Sin comentarios

HP Compaq Professional 5000 series Guía para resolver problemas Pagina 71

Comentarios a estos manuales

Relacionado con productos y manuales para Madre De Los Servidores / Estaciones De Trabajo HP Compaq Professional 5000 series