Hp ESL E-series Tape Libraries Manual de usuario descargar pdf (Pagina 129)

Message name / descriptionASCQASCSense

key

CONFIGURATION SETTINGS CORRUPTED

Reconfigure the library. Run the Calibrate Cabinet Test from the OCP.

0A804

LOW POWER ERROR

Check power connections and power supplies.

0F804

PICKER HARDWARE FAILURE

• Remove any obstructions.

• Run the Robotics Self Test from the OCP.

See

Table

22

814

ROTARY HARDWARE FAILURE

• Remove any obstructions.

• Run the Robotics Self Test from the OCP.

See

Table

22

824

EXTENSION HARDWARE FAILURE

• Remove any obstructions.

• Run the Robotics Self Test from the OCP.

See

Table

22

834

VERTICAL HARDWARE FAILURE

• Remove any obstructions.

• Run the Robotics Self Test from the OCP.

See

Table

22

844

HORIZONTAL HARDWARE FAILURE

• Remove any obstructions.

• Run the Robotics Self Test from the OCP.

See

Table

22

854

DEPTH HARDWARE FAILURE

• Remove any obstructions.

• Run the Robotics Self Test from the OCP.

See

Table

22

874

WARNING SAFE TEMPERATURE EXCEEDED

This is a warning that the temperature in the library exceeds the normal

operational temperature 40

o

C (104

o

F).

00884

MAXIMUM TEMPERATURE EXCEEDED

The robot in the overheated cabinet turns off and remains off until the

temperature returns to an acceptable level. For LTO, the acceptable level

is 52

o

C (127

o

F); for SDLT, the acceptable level is 49

o

C (120

o

F).

• Check whether the air filters need to be replaced.

• Check for fan failure.

• Lower the ambient temperature.

01884

VISION HARDWARE FAILURE

Vision internal failure.

00–FF894

CALIBRATION FAILURE

Check slots, cartridges, targets, and all internal elements. Verify that the

panels are properly seated and that doors are closed.

028A4

HP StorageWorks ESL E-Series Tape Library 129

1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 175 176

Comentarios a estos manuales

Sin comentarios