Hp ESL E-series Tape Libraries Manual de usuario Pagina 132

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 176
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 131
Message name / descriptionASCQASCSense
key
PARAMETER VALUE INVALID
Verify Mode Select page fields.
Verify that fields comply with command format described in this guide.
This response is also returned for commands issued to the diagnostic
interface of the library if an invalid parameter is sent.
Verify that the host software application is supported, has up-to-date
patches, and is correctly configured.
Verify that the library and its components have the current firmware.
02265
CLEANING CARTRIDGE INSTALLED
A cleaning cartridge cannot be removed from a drive because it is being
used in a cleaning operation. A cartridge cannot be placed into the drive
because the drive is being cleaned. A cartridge cannot be placed into
an empty storage element because it is reserved for a cleaning cartridge
that is currently in use in a drive cleaning operation.
03305
SAVING PARAMETERS NOT SUPPORTED
Verify Save Parameter field in the Mode Select page complies with
the command format described in this guide.
Verify that the host software application is supported, has up-to-date
patches, and is correctly configured.
Verify that the library and its components have the current firmware.
00395
MEDIUM REMOVAL PREVENTED
Prevent Medium Removal command was executed and command was
received to export cartridge. Retry move command using your application
software.
02535
TRANSFER FULL - COMMAND CAN NOT BE EXECUTED
Picker has cartridge in it.
Move cartridge to empty storage element using your application
software. Retry command.
As a last resort, manually remove the tape from the picker.
01805
ELEMENT CONTENTS UNKNOWN
The contents of an element address are unknown. Re-inventory the library.
22805
TRANSPORT FULL
The picker contains a cartridge.
Issue a command to retrieve the cartridge from the picker and place
it in either a bin or a tape drive.
As a last resort, manually remove the tape from the picker.
C0815
PICKER INVALID START CONDITION
Picker hardware condition is unknown. Run the Robotics to Home Position
test from the OCP.
E0815
PICKER INVALID COMMAND
Picker hardware commanded to position out of system mechanical limits.
Run the Robotics to Home Position test from the OCP.
F0815
Sense data values132
Vista de pagina 131
1 2 ... 127 128 129 130 131 132 133 134 135 136 137 ... 175 176

Comentarios a estos manuales

Sin comentarios