HP 8800 Router Series Manual de instalación descargar pdf (Pagina 114)

Figure 75 Binding the cables

• When you route cables through sharp sheet metal penetration points or along sharp edges of

mechanical parts, use bushings or take any other action to protect the cables from being cut or

abraded. The sheet metal penetration points must be smooth and fully rounded.

• When optical fibers are inserted into a protective tube, wrap tapes around the edges of the

protective tube to protect optical fibers from being cut.

• After binding the cables, cut the excess from the ties, leaving no sharp or angular tips.

See Figure 76.

Figure 76 Cutting the cable ties

• Route, bind, and attach excess cables for easy, safe maintenance activities and proper

operations.

• Do not tie the power cables to the slide rails.

• When you connect a cable to an articulated part, for example, when you connect a grounding

cable to a rack door, leave enough slack in cables and make sure they are not stressed from any

movement of the part.

• Cables must be protected at points where they might rub or come in contact with sharp edges or

heated areas. Use high temperature cables near heat sources.

• Fasten heavy or rigid power cables at the connectors to relief stress.

Cable management examples

109

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 120 121

Sin comentarios

HP 8800 Router Series Manual de instalación Pagina 114