
To install a cable management bracket:
1. Attach the cable management bracket to the chassis, and align the screw holes on the cable
management bracket with the screw holes on the chassis, as shown in Figure 4.
2. Screw in and fasten the M4 screws with a screwdriver.
Figure 4 Installing the cable management brackets on the A8808
Installing the cable management brackets on the A8805/A8812
Install the cable management brackets to the mounting brackets (cable management brackets and
mounting brackets are required at both sides of the chassis). Figure 5 shows how to install a right
cable management bracket. The method for installing the left cable management bracket is the same
as the right.
8
Comentarios a estos manuales