Hp Surestore Disk Array 12h and FC60 Manual de usuario Pagina 283

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 466
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 282
Managing the Disk Array Using Array Manager 60 283
Managing the Disk Array
on HP-UX
Command Example
The following example all status information for disk array Array1.
amdsp -a Array1
A sample out put from this command is shown in Figure 88. The important fields are
identified with the normal values.
Note
Missing UTM LUN 31
If the required patches for HP08 firmware are not installed on the host, the host
will not recognize or display UTM LUN 31. If LUN 31 is not displayed, install
the required patches as described in "Installing the Disk Array FC60 Software"
on page 214.
-a All status. This option displays all the information returned by the
preceding options.
-p <devicefile> Hardware path information. Displays hardware path information for
the controller corresponding to the specified device file.
-r Rebuild status. Display the progress of any rebuilds occurring on the
disk array.
-A Array server status.
Table 37
Command Options for Displaying Disk Array Status (cont’d)
Option Status Information Displayed
Vista de pagina 282
1 2 ... 278 279 280 281 282 283 284 285 286 287 288 ... 465 466

Comentarios a estos manuales

Sin comentarios