HP Integrity NonStop H-Series Guía de usuario descargar pdf (Pagina 138)

HP NonStop Shadowbase Command Definitions

Consumer Command Descriptions

HP NonStop Shadowbase Command Reference Manual—785421-002

129

This parameter is used to enable the faster Consumer process startup

method for auto restarts. When ON and whenever the CONS is started

due to an auto restart, it will use the faster method of startup introduced

with the CONS FASTSTART parameter. This takes precedence over the

CONS FASTSTART parameter and the DBS DOIFNOAUDATSTART,

DOIFNOSRCATSTART, and DOIFNOTRGATSTART parameters for auto

restart of the CONS by AUDMON. For manual starts (via a START CONS

command), the CONS FASTRESTART parameter has no effect, and the

behavior specified by the above mentioned CONS and DBS parameters is

used. When FASTRESTART is OFF, the CONS always determines its

startup behavior based on the other parameters as before. The default

value is ON.

FASTSTART {ON}

{OFF}

Initial Changed

Version Version Values Default Minimum Maximum Alter

4.091 OFF OFF On No

This parameter is used to enable a faster Consumer process startup

method. FASTSTART is OFF by default. When FASTSTART is OFF, the

Consumer preloads its source/target selection list, which involves some

overhead (or a lot depending on the number of DBSs it must scan) to

locate the files/tables and file label information. When FASTSTART is

ON, the Consumer bypasses this preload step, resulting in the Consumer

starting faster (can be significantly faster in some environments). When

ON, the Consumer adds source/target file selection information to its list

as audit trail events are received to be processed. Consequently, the file

label lookup time is spread out over time.

FASTSTART cannot be altered after the CONS has been started. Note

that if any of the DBS parameters DOIFNOAUDATSTART,

DOIFNOSRCATSTART, or DOIFNOTRGATSTART is set to STOP or

WARN, the FASTSTART parameter is ignored and the Consumer

preloads its selection list during startup. Also, note that the default for

these DBS parameters is WARN.

FETCHSRCCLNUPTM {minutes}

Initial Changed

Version Version Values Default Minimum Maximum Alter

5.001 60 0 32767 No

Periodically, the CONS will cleanup source files it is tracking for purposes

of “fetch source” processing. This parameter defines the number of

minutes of inactivity for a given source that the CONS will wait before

1 2 ... 133 134 135 136 137 138 139 140 141 142 143 ... 345 346

Comentarios a estos manuales

Sin comentarios

HP Integrity NonStop H-Series Guía de usuario Pagina 138

Comentarios a estos manuales

Relacionado con productos y manuales para Software HP Integrity NonStop H-Series