HP Integrity NonStop H-Series Guía de usuario descargar pdf (Pagina 34)

HP NonStop Shadowbase Command Definitions

Monitor Command Descriptions

HP NonStop Shadowbase Command Reference Manual—785421-002

STATE – This is the state of the pulse event. Possible values are:

 INCOMPLETE (in progress or never completed),

 ACTIVE (incomplete but CONS did a pulse file target I/O),

 TIMED OUT,

 COMPLETE (“in band”), i.e.,i.e., it completed within the

PULSEMAXRESPONSE, and

 COMPLETE-OOB (“out of band”), i.e.,i.e., it completed by not

within the PULSEMAXRESPONSE.

COMPLETE TS - This is the time after the pulse file target I/O has been

performed.

TIMEOUT TS - This is the time when (if) a pulse event times out in

AUDMON.

ADT EVENT TS - This is the timestamp of the TMF audit trail record

associated with the pulse record.

COLL ADT READ TS - This is the time that the Collector read the pulse

event from the TMF audit trail.

COLL SEND TS - This is the time that the Collector sent the pulse event

to the Consumer. Setting of this time by the Collector can be disabled by

entering the SBCOLLPULSESENT TACL PARAM with the value set to

zero before starting AUDMON. See the HP NonStop Shadowbase

Operations Manual for details on the SBCOLLPULSESENT TACL

parameter.

CONS CL RECV TS - For a Consumer client, either going to an HP

Shadowbase Other Servers or to a HP NonStop server over TCP/IP, this

is the time when the client Consumer received the pulse event from the

Collector. Setting of this time by the Consumer can be disabled by

entering the SBCONSPULSERECV TACL PARAM with the value set to

zero before starting AUDMON. See the HP NonStop Shadowbase

Operations Manual for details on the SBCONSPULSERECV TACL

parameter.

CONS CL SEND TS - For a Consumer client, either going to an HP

Shadowbase Other Servers or to a HP NonStop server over TCP/IP, this

is the time when the client Consumer sends the pulse event to the open or

HP Nonstop server. Setting of this time by the Consumer can be disabled

by entering the SBCONSPULSESENT TACL PARAM with the value set to

zero before starting AUDMON. See the HP NonStop Shadowbase

Operations Manual for details on the SBCONSPULSESENT TACL

parameter.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 345 346

Sin comentarios

HP Integrity NonStop H-Series Guía de usuario Pagina 34