HP Integrity NonStop H-Series Guía de usuario descargar pdf (Pagina 153)

HP NonStop Shadowbase Command Definitions

Consumer Command Descriptions

HP NonStop Shadowbase Command Reference Manual—785421-002

144

maximum value is 65535. The NETADDRESS/NETPORT combination

must be unique for each Consumer. It must match the NETWORK PORT

parameter entered in the HP Shadowbase Other Servers configuration.

NETPROCESS process_name

Initial Changed

Version Version Values Default Value Specifications Alter

1.100 $ZTC0 Valid NSK TCP/IP process name No

Client Server Extended Open Target

This identifies the HP NonStop network process for the TCP/IP

environment. The process_name defaults to $ZTC0.

NETRETRYDELAY seconds

Initial Changed

Version Version Values Default Minimum Maximum Alter

2.500 15 1 3600 No

Client Server Extended Open Target

When automatic recovery is enabled by setting NETMAXERRORS greater

than 1, this parameter defines how many seconds the HP Shadowbase

Consumer waits before retrying the TCP/IP connection.It determines how

long the server waits before setting up for a new connection attempt after

closing the previous connection. Valid values are 1 to 3600. The default

is 15 seconds.

NETSENDMINWAIT hundredths

Initial Changed

Version Version Values Default Minimum Maximum Alter

2.500 0 0 1000 Yes

Client Server Extended Open Target

This defines the minimum time, in hundredths of a second, the HP

Shadowbase Consumer waits between sending messages. It is used to

keep the messages from flooding the network during times of peak activity

when asynchronous communication is configured via the NETBUFFERS

Consumer parameter. Valid values are 0 to 1000 (10 seconds). The

default value is 0. 0 means there is no delay between messages. Setting

this value too high can degrade performance. This value can be altered

while HP Shadowbase is running.

NETSWAPCONNECT { OFF }

{ ON }

Initial Changed

Version Version Values Default Minimum Maximum Alter

3.933 OFF OFF ON No

1 2 ... 148 149 150 151 152 153 154 155 156 157 158 ... 345 346

Comentarios a estos manuales

Sin comentarios

HP Integrity NonStop H-Series Guía de usuario Pagina 153

Comentarios a estos manuales

Relacionado con productos y manuales para Software HP Integrity NonStop H-Series