HP Integrity NonStop H-Series Guía de usuario descargar pdf (Pagina 250)

HP NonStop Shadowbase Command Definitions

Database Specification Command Descriptions

HP NonStop Shadowbase Command Reference Manual—785421-002

241

FILEDDLRETRIES = 0: No retries.

FILEDDLRETRIES > 0: The number of times to retry the operation

after the initial failure.

The default value is -1: use the value set for the CONS. Note that this

parameter can’t be altered at this time.

HADWLOGEVENTS { ON }

{ OFF }

Initial Changed

Version Version Values Default Minimum Maximum Alter

3.964 OFF OFF ON No

Determines whether or not a trace of the events that are processed by the

HADW solution are logged into the EMS subsystem. This is useful for

understanding (or debugging) the HADW logic. The default is OFF.

Note: Parameter only used when you have the HADW option configured

in HP Shadowbase.

HADWLOGREJECT { ON }

{ OFF }

Initial Changed

Version Version Values Default Minimum Maximum Alter

3.964 OFF OFF ON No

Determines whether a REJECT FILE event is logged when an incoming

event is discarded or a data collision is detected. The default is OFF.

Note: Parameter only used when you have the HADW option configured in

HP Shadowbase.

HADWLOGSAME { ON }

{ OFF }

Initial Changed

Version Version Values Default Minimum Maximum Alter

3.964 OFF OFF ON No

This parameter determines whether an EMS message is logged when an

event that satisfies the HADWSKIPSAME criteria is met. The default is

OFF

Note Parameter only used when you have the HA-DW option configured

in HP Shadowbase.

HADWSKIPSAME { ON }

{ OFF }

1 2 ... 245 246 247 248 249 250 251 252 253 254 255 ... 345 346

Sin comentarios

HP Integrity NonStop H-Series Guía de usuario Pagina 250