HP Integrity NonStop H-Series Guía de usuario descargar pdf (Pagina 42)

HP NonStop Shadowbase Command Definitions

Monitor Command Descriptions

HP NonStop Shadowbase Command Reference Manual—785421-002

default is 1. The maximum value is 255. Depending upon your

implementation strategy, setting this parameter may not be necessary.

MAXCONS number

Initial Changed

Version Version Values Default Minimum Maximum Alter

1.000 1 1 255 No

Is the maximum number of Consumer processes that can be described in

the HP Shadowbase configuration. At least 1 must be configured and the

default is 1. The maximum is 255. Depending upon your implementation

strategy, setting this parameter may not be necessary.

MAXDBSSPEC number

Initial Changed

Version Version Values Default Minimum Maximum Alter

1.000 3.960 128 1 2500 No

Is the maximum number of table or file inclusion and exclusion

specifications that can be entered into the HP Shadowbase configuration.

The minimum is 1. The default is 128.

MAXPULSESTATS number

Initial Changed

Version Version Values Default Minimum Maximum Alter

3.990 2 1 32767 Yes

This defines the number of pulse records displayed for a Consumer during

PULSESTATS command processing when a FROM and TO timeframe is

not specified. By default, MAXPULSESTATS is 2. The valid range is 1

through 32767. This parameter can be altered at any time.

MAXQUERYDUR seconds

Initial Changed

Version Version Values Default Minimum Maximum Alter

3.990 60 1 32767 Yes

This defines the maximum run-time, in seconds, AUDMON will allow for

processing a PULSESTATS command. The query will be terminated early

if the run-time exceeds this setting and AUDMON will return an error

indicating this has occurred (you can re-enter your PULSESTATS

command using a shorter interval). The default is 60 seconds. The valid

range is 1 through 32767. This parameter can be altered at any time.

Note that you should try to run small size inquiries to avoid delaying other

important AUDMON processing (e.g., process state monitoring).

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 345 346

Sin comentarios

HP Integrity NonStop H-Series Guía de usuario Pagina 42