HP Integrity NonStop H-Series Guía de usuario descargar pdf (Pagina 41)

HP NonStop Shadowbase Command Definitions

Monitor Command Descriptions

HP NonStop Shadowbase Command Reference Manual—785421-002

When set to ON, the user will be asked to enter Y or N to confirm that the

indicated control command (ALTER <object>, SHUTDOWN, STOP

prompted for confirmation before the commands are executed. Default is

OFF.

CONFIRMSHUTDOWN { OFF }

{ ON }

Initial Changed

Version Version Values Default Minimum Maximum Alter

4.092 OFF OFF ON Yes

This parameter is used to have AUDCOM prompt if the STOP or

SHUTDOWN command should be processed. The default is OFF. When

the parameter is set to OFF, AUDCOM will not prompt. When ON,

information regarding the restart position and the audit trail backlog will be

output and the user will be asked to confirm the command. At the prompt,

the user must then enter “Y” or “N” to indicate if the command should be

processed or not. This parameter can be altered at any time.

HISTORYRATE seconds

Initial Changed

Version Version Values Default Minimum Maximum Alter

2.000 4.092 0 0 disable/3600 32767 Yes

Is the number of seconds to delay before capturing the next set of

historical operating statistics. The default is 0 – statistics will not be

gathered. When a value greater than 0 is entered, AUDMON captures and

records historical statistics in a disk file named AUDHST at the specified

rate. The minimum allowable value to enable history is 3600 seconds. If

HISTVOL is specified, the AUDHST file will be maintained in that volume

and subvolume. Otherwise, it will be maintained in the default volume and

subvolume. See HISTVOL command description for more information.

See the HP NonStop Shadowbase Installation and Planning Manual for

more information on AUDHST.

MAXCOLL number

Initial Changed

Version Version Values Default Minimum Maximum Alter

1.000 1 1 255 No

Is the maximum number of Collector processes that can be described in

the HP Shadowbase configuration. At least 1 must be configured and the

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 345 346

Sin comentarios

HP Integrity NonStop H-Series Guía de usuario Pagina 41