HP 7000 dl Router Series Guía de usuario descargar pdf (Pagina 263)

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set

ip default-gateway <ip address>

Use the ip default-gateway command to specify a default gateway if (and only if) IP routing is NOT

enabled on the unit. Use the ip route command to add a default route to the route table when using IP

routing functionality. See ip route <ip address> <subnet mask> <interface or ip address> on page 302

for more information.

Syntax Description

<ip address> Specifies the default gateway IP address in the form of dotted decimal notation

(example: 192.22.71.50).

Default Values

By default, there is no configured default-gateway.

Command Modes

(config)# Global Configuration Mode required

Functional Notes

Only use the ip default-gateway when IP routing is disabled on the router. For all other cases, use the

ip route 0.0.0.0 0.0.0.0 <ip address> command.

Usage Examples

The following example disables IP routing and configures a default gateway for 192.22.71.50:

(config)#no ip routing

(config)#ip default gateway 192.22.71.50

Sin comentarios

HP 7000 dl Router Series Guía de usuario Pagina 263