HP 7000 dl Router Series Guía de usuario descargar pdf (Pagina 845)

SROS Command Line Interface Reference Guide HDLC Command Set

qos-policy out <mapname>

Use the qos-policy out command to apply a previously-configured QoS map to an interface. Use the no

form of this command to remove the map from the interface. The out keyword specifies that this policy

will be applied to outgoing packets.

Syntax Description

<map name> Specifies the name of a previously-created QoS map.

Default Values

No default value is necessary for this command.

Command Modes

(config-interface)# Interface Configuration Mode

Valid interfaces include: Ethernet (eth 0/1), virtual PPP interfaces (ppp 1), virtual

HDLC interfaces (hdlc 1), virtual Frame Relay sub-interfaces (fr 1.20), tunnel

interfaces (tunnel 1), and VLAN interface (vlan 1).

Usage Examples

The following example applies the QoS map VOICEMAP to the HDLC interface:

(config)#interface hdlc 1

(config-hdlc 1)#qos-policy out VOICEMAP

Sin comentarios

HP 7000 dl Router Series Guía de usuario Pagina 845